TJ: 3" Coil Spring Base Lift Kit w/ Quick Disconnects & 9550 VSS Twin-Tube Features:
3" lift coil springs (4)
9550 VSS Shock absorbers (4)
Rear swaybar links (2)
Rear trackbar bracket
Transfer case drop kit
Bumpstop extensions (4)
Front quick disconnect links
Necessary hardware w/ transfer case lowering kit
Limited lifetime warranty
Improve vehicle stablity and increase ground clearance for your Jeep TJ
The TeraFlex 3in Suspension Lift Kit is smartly designed to offer spectacular full-trail performance with very minimal modification. This kit incorporates; 3" lift coil springs, 9550 VSS shock absorbers, front swaybar quick disconnects, rear swaybar links, rear trackbar bracket, bumpstops, and all other necessary hardware that includes a transfer case lowering kit if needed. This kit allows you to run up to a 33 inch size tire. See instruction manual
HERE for more information.
Coil Spring Base Lift Kit Specifications:
Fitment: TJ Wrangler (short wheelbase) • LJ Wrangler Unlimited (long wheelbase) • Lift Height: 3" • Max Tire Diameter: 33"
REQUIRES aftermarket wheels w/ 4.5” backspacing or less – or Offset Wheel Adapters (# 1005200) for stock wheels –NOT INCLUDED.
Caster correction required – NOT INCLUDED.
4”+ lifts REQUIRE CV-style driveshaft and Extreme Short Shaft Slip Yoke Eliminator Kit (# 4444400) or Short Shaft Slip Yoke Eliminator Kit (# 4444401). Highly recommended for 3” lift. NOT compatible w/ TJ Wrangler/Unlimited Rubicon models
Alignment REQUIRED.
REQUIRES longer shocks (NOT INCLUDED in base kit) – Falcon Series 3.0 Piggyback Shock Kit (# 04-01-30-400-304) or TeraFlex 9550 VSS Twin-Tube Shock Kit (# 1545270) recommended.
Note: Coil Spring Base Lift Kits include only the basic lift components and don't have the drivability of a full suspension system. Adjustable control arms and/or adjustable front track bars are required to correct suspension geometry.
To correct suspension geometry make sure to include a front trackbar, front lower, and rear upper control arms.