A: Yes, you will have to drill a hole for the wiring to come through. All parts needed are there.
Northridge Chris @ Northridge4x4 1 year agoA: Yes, this will work with the 5.13 gears.
Northridge Chris @ Northridge4x4 2 years agoA: They should come packaged with packing paper to fill the extra room in the box so the locker can't move all around.
Northridge Chris @ Northridge4x4 2 years agoA: This is the correct locker for you. Any brand (Yukon, Ten Factory, Revolution, etc) of the 5.13 gears will work with this locker. Here's an example of the part number for the gears; YUKYGD44JK-513RUB
Northridge Chris @ Northridge4x4 2 years agoA: You will have to upgrade the shafts too.
Northridge Chris @ Northridge4x4 3 years ago