1350 Heavy Duty rear driveshaft for 2 door Jeep JK models with an automatic transmission.
This system is a stronger than our 1310 style shaft and takes you from a 26* C.V. angle to a 32* C.V. angle.
Lifts higher than 4.5", long arm lifts & any orher than stock rear axle must be measured for driveline length.
Kit Includes :
2.75"x.083 Tubing
1350 U-Joints
Cast U-Bolt Style Yoke
1350 U-bolts
Forged T/C Flange
Grade 8 Hardware
Installation Instructions
Requirements:
Dana 44 rear axle for bolt on application