Jeep Wrangler JK Rear Track Bar Relocation Bracket. After seeing some other aftermarket trackbars bend or rip the OEM trackbar bracket off the axle, we knew we had to design something that would take most of the force off the OEM bracket. The trackbar bracket is laser cut from 1/4 metal and uses the OEM trackbar bracket for alignment purposes. This ensures it is properly installed. However, most of our strength comes from the clamping force around the axle tube. Now the forces are distributed, and failure is not a concern. This bracket can be used with the OEM trackbar or our adjustable track bar. Works with lifts from 3-6" inches.
NOTE: Track bar bracket MUST be bolted into the stock axle location AND clamp around the axle tube!
MADE IN THE USA!