Jeep Jk Steer Smarts Yeti XD Bottom Mount Draglink Features:
Extreme steering linkage
Reverse pin technology
30mm ball joints
High-quality joint seals minimize leakage
Large rolled threads at tie rod adjuster and draglink ends
1/4" thick wall 4130 DOM steel tubing
Epoxy-coated assembly resists corrosion
Simple bolt-on installation
Made in the USA
High-Quality Off-Road Ready Tie Rods
If you need more control over your everyday driving and off-road applications, the Steer Smarts Yeti XD bottom Mount Draglink can help you gain more stability
for your overland warrior. This Yeti XD Bottom Mount Draglink was engineered to accommodate enough clearance for all other chassis components, so there will be no issues
with rubbing. Moreover, the included 30mm, 1 1/2 ton ball joints are the biggest and strongest available for the JK, so you won't have to worry about holding back on your
favorite trails. Steer Smarts Reverse Pin technology prevents the linkage from flopping or rocking when you're testing the limits in your off-road warrior. This reverse pin was
built right inside the socket, making for a superior design compared to weaker add-on supports seen on competitor's draglinks.
Heavy-Duty Construction & Installation Info
The Steer Smarts Yeti XD Bottom Mount Draglink features impressive construction for superior strength and long-lasting functionality. The ball joints are crafted from cold-headed medium carbon alloy
to provide incredible impact toughness for extreme duty usage. Steel on steel bearings provide ultimate fatigue strength, so they'll be able to handle the constant abuse of your Jeep's aggressive build.
For even more strength, the rod ends at both the adjuster and draglink feature large 1-1/4" rolled threads which are much more durable than the OE threads. Additionally, the adjuster is made from
1/4" thick wall 4130 DOM steel tubing to ensure the assembly won't loosen. When it comes to installation, this entire assembly is completely bolt-on and features a "No Drill" Reverse Taper Mount, should it only take about a few minutes to complete.
Adjuster Tube:
Draglink adjuster is manufactured from large diameter ¼ inch thick wall high strength 4130 Chromoly steel tubing for maximum buckling strength.
Adjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts.
Designed with right hand and left hand threads for quick and easy adjustment when installed on the vehicle.
Internal threads and tube are also e-coated for long term serviceability.
***NOTE*** A MINIMUM LIFT HEIGHT OF 4.5" ( AND CORRECT BUMP STOP) IS REQUIRED FOR A TOP-MOUNT DRAGLINK. PART #79022001 (TRACK BAR RELOCATION BRACKET) IS NECESSARY WHEN FLIPPING YOUR DRAGLINK - IT MAINTAINS PROPER TRACK BAR AND DRAGLINK GEOMETRY. FOR THOSE RUNNING METAL CLOAK LIFTS, WE DO NOT RECOMMEND A TOP MOUNT DRAGLINK FOR THEIR LIFT KITS D/T INTERFERENCE ISSUES.Note: A minimum of 17” wheels are recommended. 16" wheels with a maximum 4.5 back spacing might fit but not guaranteed.
Very well built and came packaged extremely well. Install was pretty easy witht he online instructions. As I just installed these will have to post another review after some time with these on the Jeep.
This drag link is perfect. This thing is beefy. I already had the support bracket and track bar so I added this drag link and tie rod. This upgrade made my JT drive normal.
I was looking to purchasing STEER SMARTS YETI XD BOTTOM MOUNT DRAGLINK Part # 78075001 but your site states it will not fit. This is the part number smart steer gave me. I just wanted to check before ordering. Same goes for the tier rod assembly part # 78076001.
I have a 2021 Jeep Gladiator JT Sport S Diesel.
0 of
0 people found the following answer
helpful
A:
These are the correct part numbers fir your Jeep.