Adams Driveshaft Heavy Duty Greasable Front 1310 CV Driveshaft Features:
Made out of 2" X .120 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing and will clear the exhaust and cross member eliminating damage to the driveshaft at full droop
Long Full Spline Slip n Stub
Built only with Components made by Spicer and Neapco
Has the Strongest Greasable U-joints on the Market
Has a Heavy Duty Flange on it that fits your OEM Pinion Flange so it is Easier to install and you won't need to Disturb the Crush Sleeve
Comes with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite
Driveshaft comes painted Gloss Black Show Quality
Accommodates Larger Wheel and Tire Combo
If you are looking for a driveshaft that will let you accommodate larger
wheels and
tires on your Jeep Wrangler JK, you have come to the right place. This Heavy Duty Series Greasable 1310 CV Driveshaft will work up to 35" tires. After that size, we recommend you upgrading to Extreme Duty 1310 Spicer Solid Series as they work best with this driveshaft. Bigger tires adds more weight, traction, and pressure on your drivetrain components. Your driveshafts, axles, gears, etc cannot operate properly under with these conditions and you will likely see a huge drop in performance without the proper parts and modifications. It is vital that you make sure you are buying the right driveshaft for your Jeep.
Double the Strength of Factory Tubing
The tubing used in the construction of the Adams Driveshaft Heavy Duty Greasable Front 1310 CV Driveshaft is twice as strong as the tubing used with the factory units. The 2" X .120 Wall D.O.M. tubing will clear the exhaust and cross member eliminating damage to the driveshaft at full droop. This is of the upmost importance if you plan on putting your Wrangler through some serious off-road abuse. This drive shaft features a heavy-duty flange that fits conveniently on the OEM pinion flange making it possible to complete installation without affecting the crush sleeve. This along with the included grade 10 CV bolts with small heads makes the installation process a lot easier.
Parts Included:
[1] 2" X .120 Wall Heavy Duty 1310 CV Driveshaft with Spicer Greasable U-joints, and a flange on it that fits your front end so it is Easier to install. Lifetime Warranty if you twist our Tube or break a Weld.
[1] American Made Front 1310 Transfer Case Output Shaft Yoke.
[1] Set of Grade 10 CV Bolts. There is four bolts total and they have small heads on them so they are easier to install.
Fitment: Jeep Wrangler JK