There has been many improvements that have been made to the 2007+ Jeep Wrangler JK but it still has some faults. One of the troublesome problems is that it has inadequate bracing for the factory track bar brackets. There has been a large number of cars that have been disabled on the trail when the factory track bar bracket gets separated from the axle housing with no prior notice. The problem on both axle housing has been reported by many vehicle owners and even though it usually occurs mostly on modified applications they also affect stock vehicle.
In order to eliminate this threat the JKS Manufacturing have developed a Front Trackbar Brace. This product usually reinforces the factory bracket and it also makes sure your track bar mount will not fail. It is usually welded on the original bracket and axle housing on multiple points hence providing a very strong and permanent solution. Another benefit of the Frontbar Brace is that it relocates the steering damper to a more effective position that usually improves the clearance and protects the damper from any impact off-road. Another secondary mounting location for the track bar is provided so as to accommodate high clearance steering conversions.
When the JKS Rear Trackbar Brace and the Wrangler JK are combined the owners can take comfort I knowing that both track bars are solid, secure and safe. They have to be installed before the factory brackets are damaged. By waiting for failure to occur so as correct is difficult and expensive to repair and can be dangerous if you are miles from home.
NOTES: