Note: Will not work with Extreme Short Slip Yoke Eliminator Kits.
Must have an SYE Kit Installed for this Driveshaft to work.
Adams Driveshaft custom makes these driveshafts using only the best components made by two American Companies, Spicer and Neapco. Adams Driveshafts start out installing Solid U-joints, Long Slip and use the Strongest castings of Components possible. Then they use D.O.M Seamless tubing that is backed up with a Lifetime Warranty on our Tubing and Welds if you break them due to torque.
This Extreme Duty Series Spicer Solid 1310 CV Driveshaft will work up to 37in Tall Tire's after that size it is recommended you upgrade to the [Extreme Duty 1350 Spicer Solid Series]. Bigger tires add more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
16.5in ride height measurement
Contents:
[1] Adams Driveshaft 1310 Solid U-joint Extreme Duty Series CV Driveshaft made out of 2in x.120 D.O.M Tubing.
[4] Brand New Grade 10 CV Bolts with small heads for easy installation.
Lifetime Warranty on the Welds and Tubing if you break due to torq. No warranty if components break due to bad angles. U-joint and CV Kit are wear Items and should be greased about every three months or three thousand miles whichever comes first. No warranty if u-joints are not maintained properly.