SET YOUR VEHICLE
TALK TO A PARTS EXPERT
SPECIALS!
-
Q: 06 rubicon front axle Jeep McJeepface3 years ago
Will this locker fit in a 2006 rubicon front axle? I will be regearing to 4.88 at the same time so will I need thick cut gears to make this work?
-
-
0 of
0 people found the
following answer helpful
A: This locker will work in your 06 Rubicon axle. You would use thin 4.88 gears with this locker. You would use a thick cut gear if you had the 3.73 and down locker, 19977-010.
Northridge Kaleb @ Northridge4x4 3 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Eaton e locker Beau4s3 years ago
-
-
0 of
0 people found the
following answer helpful
A: You are going to want this one. https://www.northridge4x4.com/part/lockers/19977-010-eaton-dana-44-elocker-30-spline-3-73-and-down
Northridge Chris @ Northridge4x4 3 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Eaton e Locker 3.92 and up hemi1run3 years ago
-
-
0 of
0 people found the
following answer helpful
A: Yes, but the gear set also plays a role in that. There are thick or thin cut gear sets. With this locker you would need to use the thin cut 4.88 gear set, like the Yukon YUKYGD44-488. If you have thick cut gears, then you would use the EAT19977-010 locker with the 4.88's.
Northridge Kaleb @ Northridge4x4 3 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful