MATT

Reviews

MATT has reviewed 11 Product(s).

Outboard Shocks Without Raising the Mounts
motomatt 4 months ago
A simple way to outboard shocks without lifting the height of the mount like many other outboard brackets do. Bolted on easily and gained some uptravel over the previous outboard mounts I had.
---
EVO Manufacturing Protek Front Shock Relocation Brackets, Black

Good, But Has Some Flaws
motomatt 8 months ago
The lights and brackets themselves are great. The crimps on the wiring were not done correctly and falling out. The relay was also obnoxious. I ended up cutting the relay portion out and using JScan to bypass the hyper flash and it has been great since. Much more affordable than other options which makes you feel less bad when you inevitably hit them with a tree or rock. By doing the full fender chop I was able to pull a bump stop puck front and rear and gain 1” of uptravel with no rubbing.
---

---
Rugged Ridge Front DRL Chop Brackets

Inflate Tires Quickly
motomatt 8 months ago
This compressor works great. With a 4 tire inflation system I can air up my 37s from 15 psi to 30 psi in about 5 minutes.
---
ARB 12V Twin Compressor

Clean ARB Install
motomatt 8 months ago
Really clean way to mount an ARB Twin compressor under the seat and out of the elements. You barely notice it is there. The integrated switch mount is convenient.
---
Grimm Offroad Under Seat Twin Compressor Mount Kit

Well Designed Gussets
motomatt 10 months ago
I've installed Artec trusses and gussets on a few different axles and I'm always impressed with their quality and fitment. These needed to be bent out a little bit but I didn't have to modify them to fit and slid right into place.
---
Artec Industries Inner C Gussets

Made Installation Much Easier
motomatt 10 months ago
The price is right and made the installation of the Dynatrac ball joints much easier.
---
Dynatrac Install Bushing Tool Set for ProSteer Ball Joints

If You Have Aluminum Knuckles, Buy These
motomatt 10 months ago
The stock aluminum knuckles are severely under-engineered. Even Jeep knew they were not designed for larger tires since they put steel knuckles on a few packages such as the XR and the Mojave. The Reid knuckles are worth the peace of mind and install was very simple, especially if you are already replacing your ball joints.
---

---
Reid Racing HD Replacement Knuckle - Passenger Side

Worthwhile Peace of Mind
motomatt 10 months ago
The stock aluminum knuckles are severely under-engineered. Even Jeep knew they were not designed for larger tires since they put steel knuckles on a few packages such as the XR and the Mojave. The Reid knuckles are worth the peace of mind and install was very simple, especially if you are already replacing your ball joints.
---

---
Reid Racing HD Replacement Knuckle - Driver Side

Huge Improvement Over Stock
motomatt 10 months ago
With only 20k miles on my 2020 JLUR (and only 5k miles of those lifted on 37s) the stock under-engineered ball joints were already starting to show their age. Installed these and my steering shimmy was gone and the steering tightened up. Plus I'll never have to worry about pressing in new ball joints again since these are rebuildable.
---
Dynatrac HD ProSteer Ball Joint Kit

Firmer Steering and Peace of Mind
motomatt 1 year ago
Track bar issues are a well-known problem for most solid axle vehicles. Add in the aluminum steering box that early JLs have and you can be fighting two different problems. I didn't have any noticeable wandering in my steering box but definitely noticed everything firmed up after the installation. I like this design better than the others offered.
---
Steer Smarts Yeti XD Sector Shaft Brace w/ Frame Side Track Bar Bracket

Makes JScan Much Easier
motomatt 1 year ago
While it isn't extremely difficult to bypass the security gateway, this extension makes it much easier. Well worth the price to be able to plug in the bypass cable and utilize all of the features of JScan.
---
Z Automotive SGW Extension Cable

Questions

Answers

Images