David

Reviews

David has reviewed 7 Product(s).

Tightens up the steering
glamisdave05 2 months ago
Made a difference in steering feel. Only issue I have is my torque wrench only goes to 150, need 185 ft-lbs. Quality part.
---
Steer Smarts Yeti XD Sector Shaft Brace w/ Frame Side Track Bar Reinforcement Bracket

Great shocks
glamisdave05 2 months ago
Plenty stiff on road, just right off road. Excellent control. Highly recommended.
---
Fox 2.0 Performance Series IFP Shock Rear 1.5-3.5in Lift

Easy, always a good product
glamisdave05 4 months ago
I have used this type of air filter for many years. Don't expect it to make more HP, but its easy to clean, good filtration and inexpensive.
---
Rugged Ridge REUSABLE AIR FILTER

Great part, very good quality
glamisdave05 4 months ago
I installed this on my 2016 Jeep Wrangler Rubicon with a 2.5" lift and 35's. After the lift the steering felt numb and it needed a lot of steering correction. Had to to 2 alignments shops and the alignment was 100%. Northridge 4x4 chat steered me in this direction and I am glad they did. The steering is more responsive and feels tighter. It was easy to put on except I figured out my track bar bracket mounted to the frame was bent so it took about 3 hours from start to finish. 1 install tip, the instructions say to tighten the 4 bolts that go through the frame and into the steering box on step 5 or so, don't do that. Get everything started and snug (including track bar) before fully tightening anything. There is a bit of adjustment (up/down/left/right) so wait until the end to fully tighten everything.
---
Steer Smarts Yeti XD Sector Shaft Brace w/ Frame Side Track Bar Reinforcement Bracket

Great shocks
glamisdave05 5 months ago
These are a great all around shock for my JK. They are firm, but not harsh. They pass the wife test so that is good. For the price you can't beat them.
---
Fox 2.0 Performance Series IFP Shock Rear 1.5-3.5in Lift

Nice part
glamisdave05 5 months ago
It works, its tucked up pretty high so it won't hang up, its not a replacement for a full belly pan, but does what it needs to. Can't beat it for the price. Instructions call for removing the crossmember, but youtube to the rescue, you can do it without removing the crossmember.
---
Rubicon Express Automatic Transmission Skid Plate

GREAT Bumper
glamisdave05 9 months ago
Install was spot on, very sturdy, all holes lined up, mounted a Warn winch and no problems. First time using Icon bumper and very pleased.
---
Icon Vehicle Dynamics Impact Series Front Bumper w/ Skid Plate

Questions

Answers

Images